MATERIAL SAFETY DATA SHEET (MSDS)

The Dissolver contains less than 15% of this ingredient.  With over eight (8) years of testing and continued consumer use, there has been no incidence of discomfort or skin or scalp irritations discovered or reported.

The following is a chemical breakdown of the chemical properties of this OSHA regulated ingredient.  Please be aware that the dissolver contains 15% of this ingredient, so that what ever toxicity that this ingredient contains the amount in the dissolver is only 15% far below the amount that could have any adverse affect for human external use or fire hazards.

The base majority ingredient in the dissolver is a Cosmetic Grade Mineral Oil that has no OSHA regulations. Remaining ingredient are not regulated by OSHA and are considered trade secrets if present.

The purpose of a MSDS is to alert the consumer of any ingredient that may pose a hazard or could cause injury or pose a health problem for human use.

here following is the information on the OSHA regulated ingredient……..

COMPOSITION / INFQRMATION ON INGREDIENTS
SUBSTANCE DESCRIPTION     PERCENT    CRS#       NTP    ACGIH   OSHA   IRRC---------------------------------------------------------------------------------------------------------------

Mineral Solvent     .                     50-60         N/A           N           N          N           N

    ** ABOVE INGREDIENT CONSISTS OE THE FOLLOWING **

STODDRRD SOLVENT TYPE I     95-100 8O52-41-3     N          N          N           N

1,2, 4 – TRIMETHYLBENZENE    0- 2       95-63-6          N          N           N          N

PETROLEUM DISTILLATES      40-45      64741-85-1    N           N           N          N

MATERIAL SAFETY DATA SHEET
SECTION 3.   REBULATORY INFORMATION

EXPOSURE LIMITS / REGULATORY INFORMATION
SUBSTANCE DESCRIPTION     REG.AGCY  U/M    TWA    STEL   CElL  SKIN   PEL
---------------------------------------------------------------------------------------------------------------
MINERAL SOLVENT                    ACGIH      PPM     N/E       N/E     N/E      N     N/E
                                                    OSHA      PPM      N/E       N/E     N/E      N    N/E

     EXXON RECOMMENDS AN OCCUPATIONAL EXPOSURE LIMIT OF 100 PPM  
     TOTAL HYDROCARBON BASED ON COMPOSITION.

STODDARD SOLVENT, TYPE I    RCGIH     PPM    100.00   N/E     N/E       N   N/E
                                                    OSHA      PPM    100.00   N/E     N/E       N  500.00

1, 2, 4-TRIMETHYBENZENE         ACGIH     PPM      N/E      N/E      N/E       N   N/E
                                                    OSHA      PPM      N/E      N/E      N/E       N   N/E

PETROLEUM DISTILLATES         ACGIH       PPM    100.00  N/E      N/E       N   N/E
                                                   OSHA        PPM       N/E     N/E      N/E       N   N/E

INHALATION ACUTE EXPOSURE EFFECTS
May cause dizziness, headache, watering of eyes, eye irritation, weakness, nausea, muscle twitches

SKIN CONTACT ACUTE EXPOSURE EFFECTS
None known.

EYE CONTACT ACUTE EXPUSURE EFFECTS
May cause irritation.

INGESTION ACUTE EXPOSURE EFFECTS
Harmful or fatal if swallowed.  May cause nausea weakness, muscle twitches, gastrointestinal irritation, and diarrhea.  Severe over exposure may cause convulsions.

MEDICAL CONDITIONS AGGRAVATED
None known.

PRIMARY ROUTE EXPOSURE
Inhalation, ingestion, and dermal.

SKIN CONTACT
Wash with soap and large quantities of water and seek medical attention if’ irritation from contact persists.

EYE CONTACT
Flush with large quantities of water for at least 15 minutes and seek immediate medical attention.

INGESTION
DO NOT induce vomiting.  Call your poison control center, hospital emergency room, or physician immediately.

STORAGE
Keep container tightly closed when not in use. Store in a cool, dry place. Do not store near flames or at elevated temperatures.

HANDLING
Read carefully all cautions and directions on product label before use.  Since empty container retains residue, follow all label warnings even after container is empty. Dispose of empty container according to all regulations. Do not reuse this container.

VENTILATION PROTECTION
Use only with adequate ventilation to prevent build-up of vapors.

RESPIRATORY PROTECTION
For OSHA controlled work place and other regular users - Use only with adequate ventilation under engineered air control systems

OTHER PROTECTION
Various application methods can dictate use of additional protective safety equipment, such as impermeable aprons, etc., to minimize exposure. A source of clean water should be available in the work area for flushing eyes and skin. Do not eat, drink, or smoke in the work area. Wash hands thoroughly after use.

IMPORTANT NOTE
The information contained herein is presented in good faith and believed to be accurate as of the effective date shown above. This information is furnished without warranty of any kind. Employers should use this information only as a supplement, to other information gathered by them and must make independent determination of suitability and completeness of information from all sources to assure proper use of these materials and the safety and health of employees. Any use of this data and information must be gathered by them and must make independent determination of suitability and completeness of information from all sources to assure proper use of these materials and the safety and health of employees.  Any use of this data and information must be determined by the user to be in accordance with applicable federal, state and local law and regulations.

End of MSDS for Liquid Gold Bond Dissolver.  It is important to emphasize that this product contains less than15% of the above described OSHA regulated chemical thereby lessening the degree of hazards from its use by over 85% well within the safety standards for use as a cosmetic product.